.
In light of recent events within the UK regarding the COVID-19 virus.
For the time being online businesses are allowed to trade as normal however Modellers Resource is taking this situation very serious and will be taking steps to prevent the spread of the virus.
​Orders will be taken as normal but shipping will only take place once or twice per week.

​Thank you for your understanding and remember to stay safe.

Unless otherwise stated all parts and kits on this site are 1:24 scale
 

Accessories

Accessories

Refine Search

Pin on Trailer coupling

Pin on Trailer coupling

Fully functioning 'Pin on' coupling use on modern drawbar  trailers..

£4.00

Recovery Winch

Recovery Winch

Recovery Winch used on wreckers and Recovery Vehiclescomes as six separate parts one one length of w..

£5.00

Reflector set

Reflector set

photo-etched resin encapsulated reflector set20 side marker lightstwo types of front and rear marker..

£5.50

Rubbolite model no.38 rear lights

Rubbolite model no.38 rear lights

one pair Rubbolite model no.38 rear lights with or without centre reflector for the days before refl..

£2.50

Rubbolite model no.80 rear lights

Rubbolite model no.80 rear lights

one pair Rubbolite model no.80 rear lights when painted with   Tamiya TS-74 and ..

£2.50

Seddon Atkinson 400 conversion kit

Seddon Atkinson 400 conversion kit

This kit converts the Seddon Atkinson 401 transkit into the 400 series Seddon AtkinsonThe kit contai..

£35.00

Side to side sliding coupling

Side to side sliding coupling

Used on all modern trailers to help the driver uncouple and re-couple without climbing on the rear ..

£7.00

Spot Lights

Spot Lights

set of four resin Spot Lights with 6mm diameter photo etched lenses. if you want a basic spot light ..

£3.00

Suzie Couplings

Suzie Couplings

3 x male air line couplings, 3 x female air line couplings, 3 electrical couplings. The electrical ..

£2.50

Tool Box Side Locker

Tool Box Side Locker

1:24 Tool Box Side Locker which can be posed with the door in the open or closed position..

£3.00

Trailer Landing Legs

Trailer Landing Legs

one pair of trailer landing legs with one pair of wheels and feet..

£4.50

Wooden Decking

Wooden Decking

Machined Wooden DeckingPre-scribed with decking joints and screw heads100MM in width by 590mm in ..

£15.00

Showing 21 to 32 of 32 (2 Pages)
December 2020

As 2020 draws to a close I would just like to thank my customers for your business and wish you all a Merry Christmas and a Happy New Year.
 
I will also take this opportunity to give everyone an update on future projects. Unfortunately due to personal, corvid-19 and other issues beyond my control some of the 2020 planned projects have been delayed by around 4 months.
 
King GTL Low loader
This should be released at the end of February if not sooner
 
Chain stretchers

To go along with the above trailer I have decided to supply two types of chain stretcher kits, the old (widow maker) chain and Warwick type and the newer ratchet type. These should be available around the same time as the King GTL trailer
 
York Trailers
Currently in the redesign and production process. The flat bed will come with twist locks and coil carrier. Expected release date around the end of March 
 
Ford Cargo

Work will continue on this in January with a possible release date of around April/May 
 
Volvo F7

Again work will continue on the F7 in the New Year with an estimated completion date of late August
 
MK1 Ford Transit
T
his project has been the worst one i have under taken so far. What we all thought would be an easy conversation has turned out to be anything but. Work continues on it but I am not going to get drawn into a completion date just yet. More announcements to be made as and when.
 
Seddon Atkinson 401
Currently out of stock but with the release of the 400 conversion kit I have been asked a number of times if I will do another run. So another small run is underway but I cannot give a release date due to having to order out sourced parts. As mentioned above some companies now have a 4 months lead time, add onto that the Christmas and New Year holidays.
 
 
Other items

As always there is usually something that catches my attention and I decide to produce and I am sure 2021 will be no difference.


June 2020
Due to the Corona Virus lockdown the release of some kits have been delayed. However I am hopeful that we will be back on track soon and by the end of June the first kit to be released will be the ERF 'A' Series transkit followed shortly after by the King Low Loader Trailer. Work continues on the Ford Cargo and I would expect this to be released by the end of the year. Like wise work on Volvo F7 will continue once the current kits have been released with a view to releasing by the end of the year/start of 2021



April 2020
I have three announcments to bring you this month

Seddon Atkinson 400 conversion

this kit will consist of the following parts
Dash Board and centre console
Bumper steps
Door handles
Front grille including photo-etched parts
Due to the Corona Virus lock down various parts cannot be produced but once the restrictions are lift work will continue and a release date announced





Ford Cargo
I have managed to make some more progress with the Cargo and some of the parts have been mastered. They still need finishing touches to make them more presentable but at least I finally have something to show you.
I don’t have a release date in mind especially with the virus lockdown but work will continue and more updates posted in due course.










King Low Loader GTL Trailer
This is another kit I have been working on behind the scenes and just started the first test build which is going well so far.
There is still lots to do and again the corona virus will hold things up a little but i will make more announcements as it develops






January 2020
Having giving the re-release of the ex-KFS kits some thought over the last few months and looking at the response received regarding which kit to release first I have decided to put the Seddon Atkinson 401 into production. It will be a small run just to get the kits out there and I will then move onto another kit.
Anyone wishing to reserve a kit must email me for further details. For administration purposes I will not accept any other form of contact. Email only to Shop ‘at’ ModellersResource.co.uk



November 2019
It is with great pleasure to announce the acquisition of the following ex-KFS transkits
TQ-56 Mk2 Atkinson Borderer
TQ-51 ERF A Series
TQ-48 Leyland Marathon
TQ-27 Leyland T45
TQ-49 Scammell Trunker
TQ-37 Seddon Atkinson 401
TQ-2 Volvo F10
Due to other commitments it is unlikely any of these kits will go into production anytime soon. I am probably looking at the middle of 2020 before any of the kits are released and I am not even sure which kits will be released first. If you want to make your feelings known on which kits you would like to see on the market first please do so on my Face Book page. Don’t forget to like and follow me and you will then recieve notifications when I make updates
https://www.facebook.com/ModelTruckStore/



2rd March 2019

The
 BPW suspension and brake assembly is taking longer than expected but i have finally managed to get some assembled. due to the unique design of the airbag they can be fully adjustable and can have a ride height anywhere between 12mm and 6mm. the far one is in the raised position and the nearest one in the fully lowered position. the lifting chambers are still to be added but are in RTV at the moment​










22nd January 2019

A few things due out over the next month or so
i have reworked the 20 hole rims that i stock so they will have the newer oval hole rather than the round holes. These will come with brake disc but in order to keep the costs down they will no longer come with the super single tyres. Ideal for trailers or front steer wheels




A double drive Kirkstall axle setup which goes well with the older vehicles like Atkinson, ERF,Foden………..


 
 
8.25 x 20 wheels and tyres for the Austin/Morris and any other older vehicle
 

 


A worm drive axle
 




And finally an under chassis rear double spring setup.



Work is still continuing on the Ford Transit conversion and the Ford Cargo although slowly, more updates as and when



25th November 2018
Austin/Morris
the kit is curently being boxed up and should be on sale very soon




25th August 2018
Ford Cargo
Work has started on the Ford Cargo and i am in the design process of both a day cab and a sleeper cab version although i an unsure if i will produce both at the moment.






2nd August 2018
Credit and Debit cards
Credit and Debit cards are now accepted through the worldpay payment system. no card details are stored on my system as it is all handled by the worlds largest online paypent system.

Austin/Morris
the Austin/Morris masters are taking shape nicely and i hope to have it for sale by the end of the year. i have no idea on the price yet but it will be produced as a trans-kit but will not be designed to fit any specific chassis. although not test yet initial thoughts are that it might go well with the EMHAR Bedford chassis   



Ford D Series 
the kit is now in stock in two formats. a full long wheel base chassis and also a trans-kit version
Available Here


Towing Hitch
a new style 'pin on' towing hitch is in production and should be ready within the next month or so. it is based on this type of design




​17th March 2018
MK1 Transit conversion
This has been in the planning stages for a long time but its developing nicely now so thought I would share with you all. It will be a conversation for the current Italeri Transit MK2. Once complete it will be a matter of cutting the front off the Italeri kit and transplanting the new MK1 conversion onto the body. The conversation will consist of a complete front end, separate headlights and bezels along with a photo etched grill.
I will bring more updates as it develops
MK1 Transit

MK1 Transit



2nd February 2018

The Push/Tag axle
This kit has had updates to the masters and a new pram style wheel will be included in the new kit. It is currently in casting process and should be available in the store soon. Price TBA

 Ford D series
The masters are finally finished and like the tag axle it is currently in the casting process. The kit will be a full long wheel base 4x2 rolling chassis consisting of over 100 resin, metal and photo-etched parts. Release date and price TBA